Product Description

Professional 3D Printed Parts Hot Knife

FEATURES:

• 950F blade temperature
• Riveted and threaded knife blade for strength and safety (Qty. 2 included)
• On/Off switch
• Non-slip comfort grip
• Tool stand
• 1-15P plug (120V only)

BEST PRACTICES:

• Tool is HOT when on.  Do NOT touch tip with bare fingers.
• Avoid using sprue cutters when detaching 3D printed parts, particularly fine and fragile parts.  For larger parts that are more robust, a rotary grinder/burr attachment (ultra fine) can be used to remove large sprue components (printing base) and then use TK639 for clean-up work.
• Best used with tempered glass mat.
• Use masking tape to affix stand to mat.
• Carefully attach knife point and only tighten with pliers.
• Let knife do the work, do not press hard.
• Clean residual marks with 0000 steel wool; wear safety gloves.
• Always turn off tool when not in use and unplug from power source.
• For final part finishing, use ‘fine’ sand paper or file.
• Always wear safety glasses.

[Mfr: Walnut Hollow 29639]