NGM-B830

Product Description

Customizable Picket Fence (Qty. 10 panels)

Dimensions (per panel): Qty. 10 @ 1.6″ W x 1.2″H (64 scale feet).

Laser cut wood is unpainted and is designed to be cut to desired length.

INSTRUCTIONS:
1. Cut fence panel in half between trees hold pickets. Do not cut pickets off of tree.
2. Using a pencil, softly mark with a ruler the location of the picket cross boards
3. Gently cut from the top of picket to edge of panel, slowly removing scrap.
4. Add glue to each picket (pointed end first) and attach cross board using tweezers; repeat for bottom. Recommend G210 bottle aplicator and wood (yellow) glue. (see photo above)
5. Cut fence panel free from tree and using scissors cut to excess from bottom of picket. Note a knife might split pickets or cause picket to come free.
6. If rounded pickets are desired, cut/sand accordingly
7. If painting, use high quality paint; cheap acrylic will warp panels
8. Use included fence posts or others (e.g. nail) to mount using thick CA glue (recommend G111)